Adixen Pfeiffer MDP-5011 Turbo Drag High Vacuum Pump NO Fan, ISO63, 7.5 l/s pumping speed PN 795600


·FAST EVACUATION OF SMALL VOLUMES
·BACKING PUMP FOR TURBOMOLECULAR PUMPS
·PRODUCTION OF LIGHT BULBS & ELECTRONIC TUBES
·REGENERATION OF CRYOPUMPS
·HIGH-QUALTY FREEZE DRYING
·INTERSEAL PUMPING
·LEAK DETECTION
·SPECTROMETRY

$5,395.00

The Adixen, Pfeiffer, MDP 5011 Turbo drag high vacuum pumps has a pumping speed of 7.5 liters per second (l/s). The MDP 5011 turbo drag pump inlet is LF NW ISO 63 with a ISO KF-16 exhaust foreline flange. The MDP 5011 turbo drag pump can be used for all general-purpose high vacuum applications. This unit has NO fan and can operate with a 115VAC or 220VAC Controller.

The MDP 5011 offers high pumping performances between 10 mbar and 10-5 mbar and a maximum flowrate fo 400 sccm. With a simple construction but robust rotor and low rotational speed (27,000 rpm), the MDP 2011 is robust against accidental air in-rush, shock venting and gyroscopic effects. Including built in ceramic ball bearings. At the pump exhaust, the gases are evacuated to the atmosphere by a roughing pump. Since the MDP compression rate is set by the design, the MDP limit pressure is given by that of the roughing pump used. The MDP is easily field maintainable.

The MDP 5011 offers an ideal pumping solution. It is lightweight and compact making it an ideal dry pump for numerous applications:
·Fast evacuation of small volumes
·Interseal pumping
·Regeneration of cryopumps
·Backing pump for turbomolecular pumps
·Leak detection
·High quality freeze drying
·Spectrometry
·Production of electronic tubes

This is a Brand New Pump and comes with Manufacture Full Warranty. Cables and Act 100 Controller Card sold separately. For a complete operation manual see the .pdf to the left.

Category:
Characteristics Units MDP 5011 MDP 5011CP
Pumping speed N2 l/s 7.5
He l/s 4
H2 l/s 3
Compression ratio N2 1.10 9 1.10 6
He 2.10 4 250
H2 1.10 3 50
Ultimate pressure measured
to Pneurop standards
with purge
ambiant air cooled mbar 1.10 -6 1.10 -5
forced air cooled mbar
water cooled mbar
Maximum continuous N2 inlet pressure ambiant air cooled mbar 1.10 -1
forced air cooled mbar 10
water cooled mbar 10
Maximum exhaust pressure
(pumping speed >=4m3/h)
ambiant air cooled mbar 40 5
forced air cooled mbar
water cooled mbar
Recommanded rotary vane pump
or membrane pump
ultimate pressure < 20 mbar
Starting time mn <1
Rotational speed rpm 27,000
Maximum ambient temperature ambiant air cooled °C 35
forced air cooled °C 35
water cooled °C 50
Exhaust flange DN 16
Controller ACT 100
Weight ambiant air cooled kg 2.3
forced air cooled kg 3
water cooled kg 2.5
Contollr weight kg 2
Power supply V 100/115/200/230
Hz 50/60
Power consumption VA 75