Agilent Varian MS40 Plus Roughing Pump for Agilent 6000 and 6100 Single Quadrupole LC/MS, G1960-80040


$6,253.00

The Agilent Varian MS40+ mono stage rotary vane vacuum pump is used as a roughing pump for Agilent 6000 and 6100 single quadrupole LC/MS due to its high pumping capacity, small footprint, and reduced noise level. The Agilent Varian MS40+ vacuum pumps provides a large 26.5 CFM, has a KF-25 Inlet, KF-25 exhaust, produces an ultimate pressure of 37.5 mTorr, operates on 200-240 VAC at 1200 VA 50/60 Hz, and has Agilent Varian part number G196080040 with model 9499241M002. The Agilent MS 40+ mono stage vacuum pumps are used in many systems, including the 6100B series single quad LC/MS systems which are the ideal match for Agilent’s 1220, 1260 and 1290 Infinity Series LC systems. The Agilent Varian MS40+ single stage roughing pump uses SW60 vacuum pump oil (Agilent part number 6040-1361) and the user’s manual & brochure are available for download in PDF format below.

TECHNICAL DATA RPM UNITS G1960-80040
PUMPING SPEED (at 5 mbar inlet pressure) 1800 CFM 26.5
ULTIMATE TOTAL PRESSURE* Torr 3.75×10-2
OIL CAPACITY min/max Qt. 1
MOTOR RATING 3ph Kw 0.75
ROTATIONAL FREQUENCY min/max Hz 40-60
NOISE LEVEL dB(A) ≤62
OIL TEMPERATURE °C 60
(pump operating) ** °F 140
IP Value 20
Installation category II
Pollution degree 2
OPERATING TEMPERATURE RANGE °C 12-40
WEIGHT Kg 33
lb 72.7
INLET FLANGE (Optional) DN 40KF
EXHAUST FLANGE (Optional) DN 25KF
Main Dimensions:
-length mm 418
-width mm 297
-height mm 228
Nominal Input Voltage V 200-240
Input frequency Hz 50/60
Max input power VA 1200
Internal Main Fuse (TT type) A 12.5