Adapter KF 16 (NW 16) to 1/4 NPT-Female, Flange ISO-KF, NW-16, Stainless Steel Hardware

• A: 0.75 in / 19.05 mm
• B: 0.98 in / 25 mm
• C: 0.67 in / 17 mm

The flanges, or the vacuum flange fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding flange sizes NW-10, NW-16, NW-25, NW-40, NW-50.
The KF-16 to ¼ NPT female pipe thread adapters are made out of stainless steel and are used to connect the ISO-KF flange with the male pipe. The KF 16 to ¼ inch NPT-Female Adapter assemblies consist of two flanges, a centering ring, and an aluminum clamp. A uniform application of pressure on the clamp insures a vacuum seal. The mating flange surfaces compress the o-ring, which is held in place by a metal centering ring, to generate vacuum seal.

Please refer to Recommended Products Section at the bottom of this page to choose corresponding clamps and rings for your KF The KF-16 to ¼ NPT Female Pipe Thread Adapter.
The KF to NPT Female Pipe Adapters are available in the following sizes:
NW 16 x 1/8 NPT
NW 16 x 1/4 NPT
NW 25 x 1/8 NPT
NW 25 x 1/4 NPT
NW 40 x 1/8 NPT
NW 40 x 1/4 NPT
NW 50 x 1/8 NPT
NW 50 x 1/4 NPT