10°C to 25°C 33L/Min 35L Capacity Recirculating Chiller

Add to wishlist
Compare

$5,990.00

Compare
Download PDF

Digital temperature controlled recirculating water chiller with built-in swivel casters, recommended for our IH series induction heaters (see models below). These chillers have built-in stainless steel tank, water pump and tubing for durability and rust-free operations. Water manifold included for immediate use.

Category:
 Model WAC-4
 Controller Digital micro-chip controlled with LCD screen and fluid level display
 Input power 480VAC 60Hz three-phase (3PH) 3.75kW
 Nominal cooling capacity 10366 kcal per hour
Nominal cooling capacity is according to:
Inlet chilled fluid temperature: 12°C
Outlet chilled fluid temperature: 7°C
Inlet cooling air temperature: 30°C
Outlet cooling air temperature: 35°C
 Compressor Make: Danfoss (UL Listed)
Power: 460V 3-60Hz 8A 3750 watts, LR 25A, thermally protected
Refrigerant: R407C (2,400g)
PS: 22.6 bar, TS max: 50°C, TS min: -35°C
Number of compressors installed: one
 Water pump Make: LX (CMF2-50T-A-W-G-BABE)
Power: 480V 60Hz 3-PH 550 watts 2.5/Y1.4A 3450 rpm IP55
Max liquid temperature: 70°C
Pumping speed: 33L per minute
Max pressure: 10 bar. H(max): 64m, H(n): 51m
 Reservoir capacity 35L
 Recommended coolant Distilled water
 Cooling fan Make: Weiguang (YWF4D-350S-102/34-G)
Power: 480V 60Hz 80/150 watts 0.27A 1640 rpm
Number of fans installed: two
Flow rate: 142,000 cu ft per hour
 Temperature accuracy +/- 2 °C
 Water inlet & outlet on chiller KF40 flange
 Water manifold Inlet: KF40 flange, outlet: 8mm quick connect with ball valve
 Unit/shipping weight 375 Lb / 485 Lb
 Unit/shipping dimensions 41 x 22 x 54″ / 50 x 25 x 61″ (DxWxH)
 Safety Over current, compressor delay start, water pump over load, built-in fuse, over-voltage and under-voltage, abnormal operations, phase protection
 Working environment Temperature range of chilled fluid: 5°C – 35°C. Temperature
difference of chilled fluid between inlet and outlet: 3°C – 8°C.
It is better to use the chiller while the ambient temperature is at or below 35°C
 Recommended to use with
these induction heaters
(result may vary on
different applications)		 High frequency 10kW, 20kW, 30kW
Mid frequency 25kW, 35kW
Low frequency 25kW, 35kW
 CE compliant Yes

Related products