No products in the cart.
Edwards Vacuum, RV Series Pumps PFPE, RV3 to RV12
EDWARDS RV3 vacuum pump bipolar selector vane vacuum pumps
DEWA EDWARDS VACUUM PUMP RV3 Features (1) The vacuum pump has a large pumping speed in a wide pressure range; (2) No need for oil sealing and lubrication in the pump chamber reduces the contamination of oil vapor on the vacuum system; (3) No compression in the vacuum pump chamber, no exhaust valve. The structure is simple, compact, and insensitive to dust and water vapor in the pumped gas; (4) The rotor has good geometric symmetry, so it has little vibration and smooth operation. There are gaps between the rotor and between the rotor and the shell, without lubrication, small friction loss, which can greatly reduce the driving power, so that a higher speed can be realized.
Key Features
48 dB(A) to minimize intrusive frequencies.
.D dual mode. For high throughput and high vacuum applications.
D Quick-acting inlet valve provides system protection.
. DEasy-to-use air bladder.
.” High torque, dual voltage/dual frequency motor with electric start relay.
.D Oil seal with printed gaskets for high shaft sealing efficiency.
.2 High-tech polymer blades with large diameter and easy-to-clean oil circuit.
Technical Parameters
| Speed 50Hz/60 HZ | 3.7 m3h-1/2.2ttsmin-1
3.9 m3h-1/2.3 ft3min-1 |
| Limit pressure | 2.0 x10-3 mbar/1.5 x 10-3 Torr |
| Maximum inlet pressure for water vapor | 80 mbar/60 Torr |
| Maximum permissible outlet pressure | 0.2 bar gauge pressure/2.8 psig |
| Motor power 50/60Hz | less than 10 mm for friable materials, less than 3 mm for others |
| Weight (without oil) | 25 kg/55 lb |
| Inlet flange | NW25 |
| Noise level | 48 dB(A) at 50 Hz |
| Power connector (1 phase) | IEC EN60320 C13 |
| passenger volume 50/60Hz | 3.7 m3h-1/2.2 ft3min-1
4.5 m3h-1/2.6 ft3min-1 |
| Operating temperature range | 12-40°C |
| Minimum/Maximum Oil Volume | 0.42/0.7 liters |
| Exhaust port flange | NW25 |
| Nominal speed 50/60Hz | 1500/1800rpm |
Related products
-
Edwards Vacuum
EDWARD EDWARD VACUUM PUMP OILLESS DRY SCREW PUMP 6I ELECTRIC PRELIMINARY PUMP SCANNING
Edwards VacuumEDWARD EDWARD VACUUM PUMP OILLESS DRY SCREW PUMP 6I ELECTRIC PRELIMINARY PUMP SCANNING
The Nerds pump improves on the traditional XDS pump by increasing pumping speed and reducing ultimate pressure, power consumption and noise. nXDs6i is the next generation of completely dry scroll pumps and replaces the XDS5. The gas ballast allows for the pumping of condensable vapors including water, solvents, dilute acids, and bases. nXDs6i is the next generation of completely dry scroll pumps and replaces the XDS5. nXDS offers more performance, higher pumping speeds, lower ultimate pressures, lower power consumption, and less noise than the traditional XDS family.
SKU: n/a -
Edwards Vacuum
Edwards T-STATION 85H turbo molecular pump station molecular pump trolley XDD1 TS85W2001
Edwards VacuumEdwards T-STATION 85H turbo molecular pump station molecular pump trolley XDD1 TS85W2001
The T-station85 is a compact, low-cost, removable turbomolecular pump trolley system that provides pumping speeds from 47 1s-1 to 84 1s-1 by seamlessly and systematically integrating the NEXT85H, a dry diaphragm or wet oil-sealed rotary vane pump, and an easy-to-use controller. The T-station85 comes with its own integrated controller for the molecular pump and vacuum gauge, enabling a single button start/stop system. If a vacuum gauge is fitted, the ability to control a gauge, the system breakthrough solenoid valve and delay the start of the turbomolecular pump until a certain point in time or until the system vacuum matches the gauge reading makes the T-station 85 ideal for general laboratory needs.
SKU: n/a
