No products in the cart.
Edwards Vacuum
EDWARDSAPG100-XM NW16 Vacuum GaugeWide Range GaugePanning GaugeAutomatic Vacuum Gauge
Applications:The Wide Range Gauge (WRG) series provides single interface pressure measurements at pressures from atmospheric to 10-9 mbar with a linear output. It is a compact solution that requires half the space and connecting hardware, an important advantage for many applications.The WRG has a number of novel features including a new bleeder, push-button calibration, set-point control and comprehensive diagnostics.The WRG is a cost-effective solution for vacuum management, and can be used in conjunction with Edwards controllers or integrated directly into system controls. system control.
| Pressure range | Atmospheric pressure to 10-9 mbar/Torr |
| Accuracy* | Typically 15% of earth <100 mbar and 30% of earth <10-3 mbar |
| Maximum overpressure | 6 bar absolute (87 psia) |
| Power supply | +14.5 to +36V DC |
| Power consumption | 2W (max) |
| Output signal | 1.8 to 10.2V DC |
| Adjustment | Atmosphere and Setpoint |
| Setpoint | Open collector transistor |
| Maximum Voltage | 40y DC |
| Maximum Voltage | 100 Max. |
| Working | +5 to +60 oC |
| Storage of materials exposed to vacuum | 0 to +70 0C |
| Weight | Stainless steel (AISI304, 316/321/347), Viton, soda lime glass, tungsten, traces of nickel and nickel |
| Internal volume | 26 cm3 |
| External Interface Connector | 0.8 kg |
| Interface cable | 8-way FCC68/RJ45 socket active vacuum gauge cable scope of use EN61326 industrial locations, category B emissions |
| Electromagnetic compatibility | IP40 |
| Chassis Rating | Pin assignment |
| 1. Power supply positive | 5. Signal sharing 6. Setpoint outputs |
| 2.Power supply common | 7. Atmospheric pressure calibration |
| 3.Pressure gauge output | 8. Not connected |
| 4.Pressure gauge marking | Atmospheric pressure to 10-9 mbar/Torr |
Any vacuum system that requires pressure measurement over a wide range. The WEG with AGD represents a very simple and extremely cost-effective means to achieve this.
The linear output and balancing make the WRG an attractive option for industrial 0EMs where vacuum gauges may be integrated directly into the process controller.
The WEG is suitable for use in a wide range of y and UV applications. However, if the process spends a lot of time between 5×10-4 and 5×10-3 mbar, Edwards recommends the use of standalone APG100 Pirani gauges and AIM Penning gauges, as this will improve the gauge’s availability in the application. Functional Advantages.
Microprocessor signal processing allows seamless switching between Pirani and magnetron outputs as well as linear outputs (recorded pressure scale).
D-Type includes cable strain relief and enhanced dust protection – IP44
Low magnetic field version (SL) for sensitive applications such as mass spectrometry and electron microscopy
Easily programmable setpoints cover the entire measuring range
Highly reliable discharge using magnetron technology, even in high vacuum or relatively contaminated environments, for automatic vacuum setting of the Pirani gauge element
Single push-button atmosphere setting
Extended service intervals and gauge life due to reduced HT voltage after ignition and low discharge current Extremely compact construction with recessed electrical connectors
Easy to service; both Pirani and magnetron elements can be replaced individually
Comprehensive failure mode diagnostics
Related products
-
Edwards Vacuum, RV Series Pumps PFPE, RV3 to RV12
Edwards RV5 Bipolar Selector Vane Vacuum Pumps
RV5 Edwards Vacuum Pump Features and Benefits 48 DB(a),* minimizes intrusive frequencies. Dual mode. For high throughput and high vacuum applications. Easy-to-use air bladder. Quick-acting inlet valve for system protection. High torque electric starter relay, dual voltage/dual frequency motor. Efficient high pressure lubrication. Clip-in viewing window. Oil seals with printed gaskets for efficient shaft sealing. High-tech polymer blades with large diameter and easy-to-clean oil circuit. With consistent inherent quality, cast construction.
SKU: n/a -
Edwards Vacuum, RV Series Pumps PFPE, RV3 to RV12
EDWARDS RV3 vacuum pump bipolar selector vane vacuum pumps
Edwards Vacuum, RV Series Pumps PFPE, RV3 to RV12EDWARDS RV3 vacuum pump bipolar selector vane vacuum pumps
DEWA EDWARDS VACUUM PUMP RV3 Features (1) The vacuum pump has a large pumping speed in a wide pressure range; (2) No need for oil sealing and lubrication in the pump chamber reduces the contamination of oil vapor on the vacuum system; (3) No compression in the vacuum pump chamber, no exhaust valve. The structure is simple, compact, and insensitive to dust and water vapor in the pumped gas; (4) The rotor has good geometric symmetry, so it has little vibration and smooth operation. There are gaps between the rotor and between the rotor and the shell, without lubrication, small friction loss, which can greatly reduce the driving power, so that a higher speed can be realized.
SKU: n/a -
Edwards Vacuum
Edwards T-STATION 85H turbo molecular pump station molecular pump trolley XDD1 TS85W2001
Edwards VacuumEdwards T-STATION 85H turbo molecular pump station molecular pump trolley XDD1 TS85W2001
The T-station85 is a compact, low-cost, removable turbomolecular pump trolley system that provides pumping speeds from 47 1s-1 to 84 1s-1 by seamlessly and systematically integrating the NEXT85H, a dry diaphragm or wet oil-sealed rotary vane pump, and an easy-to-use controller. The T-station85 comes with its own integrated controller for the molecular pump and vacuum gauge, enabling a single button start/stop system. If a vacuum gauge is fitted, the ability to control a gauge, the system breakthrough solenoid valve and delay the start of the turbomolecular pump until a certain point in time or until the system vacuum matches the gauge reading makes the T-station 85 ideal for general laboratory needs.
SKU: n/a -
Edwards Vacuum
EDWARD EDWARD VACUUM PUMP OILLESS DRY SCREW PUMP 10I ELECTRIC PRELIMINARY PUMP SCANNING
Edwards VacuumEDWARD EDWARD VACUUM PUMP OILLESS DRY SCREW PUMP 10I ELECTRIC PRELIMINARY PUMP SCANNING
The nXDs pump improves on the traditional XDS pump by increasing pumping speed and reducing ultimate pressure, power consumption, and noise. Gas ballast allows for the pumping of condensable vapors, including water, solvents, dilute acids and bases.
allow the pumping of condensable vapors, including water, solvents, dilute acids and bases. nXDs6i is the next generation of completely dry volute pumps and replaces the XDS5. nXDS offers greater performance, higher pumping speeds, lower ultimate pressures, lower power consumption, and less noise than the traditional XDS pump.SKU: n/a
